What Microsoft won´t tell you about Xbox 360 repairs is the reasons why it has stopped working. First and foremost, the main reason you are needing to repair your Xbox is that it is overheating and as a consequence, showing the dreaded 3 red lights of death. What you will want to do to stop the overheating is keep the Xbox out of a display cabinet as it needs room to breathe.
This will stop your Xbox from overheating and crashing in the first place. If not, put the hard drive back in and your Xbox should now be working fine. Of course you could not bother with any of the above and send your Xbox 360 back to Microsoft. If you want to risk being without your Xbox and you still have your warranty then send it back, however if you can´t wait that long then give these Xbox 360 troubleshooting tips a try.
Be aware that if they go wrong you could ruin your Xbox and lose your warranty so be cautious when following these tips.
Xbox 360 repairs at home can be done by yourself and in the convenience of your own home. Make sure your system is clean and is getting proper airflow. To improve your system airflow, trying blowing compressed air into the perforations located on the back and sides of the system.
If that does not work and you are feeling more adventurous, you can disassemble your xbox 360 and further inspect it for damage. However, you should be aware that this form of xbox 360 repair will void your warranty.
Now you will need to remove the bottom gray vent plate. The top plate is like the bottom plate except it has three tabs which hold the plate. When the top plate is removed, the final step is to remove the plate located opposite the top plate. Once the plates are removed, it is time to open up the console. Remove the six screws and the xbox 360 is now disassembled.
Whats also important is proper air flow. To improve the airflow to your system, try blowing compressed air into the slots on the back and sides of your system. Once you have completed this task, make sure to place your Xbox somewhere where it will not overheat while in use. When you are done doing this, make sure the xbox 360 is located where it has access to cool fresh air. A bad place for your xbox 360 is inside of a multimedia unit where it will not have good access to air flow thus the heat is unable to dissipate from the console.
Disassembling your xbox 360 for further damage inspection is not prohibited, but you should be fully aware that when you perform xbox 360 fix on your own, the original warranty is voided. Once you remove this plate, the last step is to take the plate off that is across from the top plate. Simply remove the six screws and you have completed the disassembly of the Xbox 360.
For A Review of Step-by-Step Videos On Xbox 360 repairs at home click here
Recent Comments